Related content
- 2025-10-02Sunwin Air-Cooled + Liquid-Cooled Hybrid Rack-Mounted Load Bank: An Efficient Solution for Data Center Testing
In data center testing scenarios, traditional load banks with a single heat dissipation method often face dilemmas such as "insufficient heat dissipation for high power" or "difficulty in adapting to small spaces". Sunwin, a leader in the power testing equipment field, has innovatively launched the air-cooled + liquid-cooled hybrid rack-mounted load bank. By integrating the advantages of two heat dissipation technologies, it provides professional support for data center equipment performance verification and system stability testing. - 2025-09-18Sunwin - EV AC Charging Pile Aging System: Double Guarantee of Quality and EfficiencyWith the rapid development of the new energy vehicle industry, the performance stability and factory quality of AC charging piles are of vital importance. The Sunwin - EV AC charging pile aging system is specially designed for the factory aging test of finished AC charging piles, making every effort to ensure the stable performance of finished charging piles and the qualified rate of outgoing products.
This system supports multiple standards and can meet the aging test requirements of national standard single - phase/three - phase, European standard single - phase/three - phase, and American standard charging pile products. - 2025-09-15Sunwin AC Single Phase / 3 Phase Non-linear Load BankIn scenarios such as data centers and network computer rooms that rely on UPS power supplies and inverter power supplies, traditional linear load banks are unable to simulate the real characteristics of non-linear loads like computers and network equipment, resulting in deviations in the actual performance testing of power supply equipment. Sunwin, deeply engaged in the power testing field, has launched the Sunwin RCD AC Single/Three-Phase Non-Linear Load Bank, which addresses this pain point with professional technology and builds a solid defense line for power supply safety.
- 2025-08-31Core application scenarios and value summary of load banks in shipyards1. Full-process detection of ship generator sets
Factory performance verification
Before installing the generator set, the load bank is used to simulate the ship's navigation, mooring, emergency and other multi-condition loads (such as propulsion system, deck machinery, household electricity and other composite loads), and the voltage stability (fluctuation ≤ ±1%), frequency response (recovery time ≤ 5 seconds), fuel efficiency and parallel operation capability of the unit are tested to ensure that the requirements of the IMO International Convention for the Safe Operation of Ships and the Prevention of Pollution are met.
30KW Liquid Cooling Load Banks: Unlock a New Paradigm for Data Center Energy Saving
Sunwin 30KW Liquid Cooling Load Bank: Unlock a New Paradigm for Data Center Energy Saving
In the wave of pursuing energy conservation and consumption reduction in the data center industry, "liquid cooling" technology has become a key solution to reduce data center energy consumption due to its reliability and feasibility. And our 30KW liquid cooling load bank is the core tool in this technological wave.
It can accurately simulate the actual heat generation and power consumption of real servers in the computer room, providing strong support for the testing of the computer room's liquid cooling effect and line power safety, and laying a solid data and testing foundation for the availability of the computer room system. With a modular design, it is easy to maintain and replace. It can be used alone or in parallel with multiple units, and each device has multiple gear adjustment functions, flexibly adapting to the needs of different scenarios.
In terms of parameters, its heat exchange efficiency is ≥95%, and the full-load accuracy is controlled within ±5%, ensuring the accuracy of testing; it is equipped with an RS485 communication interface, supports manual or remote loading, and also provides a standard Modbus RTU protocol, which is convenient for users to carry out secondary development; in terms of waterways, the inlet water temperature has a wide adaptation range (8 - 50℃), the waterway interface is equipped with an automatic exhaust valve, and the pipelines are made of 304 stainless steel, manufactured by reliable welding processes such as argon arc welding, with excellent pressure-bearing capacity, and no leakage for 2 hours under a working pressure of 1MPa; at the same time, it has a complete protection mechanism, including over-temperature, pressure, and grounding protection, which ensures the stable operation of the equipment.
In addition, the human-machine interaction and display functions are rich. The inlet and outlet water temperature, pressure, as well as power, current, voltage, flow and other data are clearly presented. Local curves and historical data can also be viewed. Data can be exported through the U port, and curves can be generated and printed on the host computer, allowing the operating status of the equipment to be fully grasped.
The 30KW liquid cooling load bank, with its excellent performance and flexible design, provides a solid and reliable test and guarantee for the energy saving and safe operation of the data center, helping the data center industry move towards a more efficient and greener future.
Please give us a message
